RO Water Testing — At Home or Lab, Verified Results

RO water testing checks whether your reverse osmosis system is filtering effectively — measuring TDS, pH, and mineral balance in the water your RO purifier outputs. Volimy's AQUA LAB team tests your RO water at home or through a verified lab, with results shared on the spot for basic parameters and a full digital report for detailed analysis. Over time, RO membranes lose efficiency — testing regularly tells you whether your purifier still removes contaminants properly, or whether your filter or membrane needs replacing.

Book RO Water Testing Not Sure If Your RO Needs Testing?

Signs Your RO Purifier Needs Testing

You don't need to wait for a scheduled check — these signs usually mean it's time to test:

Water tastes different — flat, metallic, or salty water often means the membrane isn't filtering properly anymore.

Slower flow rate — a clogged pre-filter or failing pump can change output without changing purity.

It's been 12+ months since your last professional test, even if nothing seems wrong.

You've recently changed your water source — switching between municipal, borewell, or tanker supply changes what your RO system needs to filter out.

Visible sediment or cloudiness, even briefly — this can indicate a pre-filter failure that's letting particles through.

You're setting up a new connection or moving locations and want a baseline reading.

What Gets Tested

Home visit — instant results

TDS (Total Dissolved Solids)
Confirms your RO is removing dissolved minerals and salts to a safe, drinkable range.
pH
Checks whether your water is too acidic or alkaline, which affects taste and can indicate scaling issues.
Conductivity (EC)
A cross-check against TDS, useful for spotting inconsistent readings.
Hardness
Measures calcium and magnesium content, relevant if you're on borewell or hard municipal supply.
Total Alkalinity
Indicates buffering capacity and potential for scale buildup in your system.

Lab-based — for a fuller picture

Heavy metals
Lead, arsenic, fluoride — not detectable by a standard TDS reading alone.
Microbiological safety
E. coli, coliform, and other pathogens, relevant especially after any filter replacement or system repair.
Chlorine and turbidity
Useful if your water source is municipal and chlorinated.

Testing Standards

Volimy's AQUA LAB testing follows parameters aligned with IS 10500 (Bureau of Indian Standards for drinking water) and WHO drinking water guidelines. RO output is checked against the commonly accepted 50-150 ppm range for daily drinking water — readings significantly outside this range are flagged in your report with an explanation of what they likely indicate.

Who Books RO Water Testing

Households

Checking whether an installed RO purifier is actually working, before or after AMC servicing, or after noticing a change in taste or performance.

Water Businesses

RO plant owners and packaged water suppliers testing output as part of routine quality control, or specifically to meet the testing requirement for Volimy CERT certification. See certification requirements →

How It Works

1
Book your slot
Choose a home visit or lab-based test based on your city and the depth of testing you need.
2
Testing happens
For home visits, a technician tests TDS, pH, hardness, and alkalinity on the spot and shares results immediately. For lab-based testing, your sample is collected and sent for detailed analysis.
3
Get your report
A digital report with QR verification, explaining each parameter in plain language, not just raw numbers.
4
Take action if needed
If your report flags an issue, you'll see a recommendation (membrane replacement, filter service, or further testing) rather than just a number with no context.

Common Mistakes to Avoid

✕
Relying only on taste
Water can taste fine even with elevated TDS or bacterial presence; taste isn't a reliable safety indicator on its own.
✕
Testing right after a filter change
Wait a few hours for the system to stabilize before testing, or you may get a misleading reading.
✕
Assuming zero TDS means safest water
Very low TDS strips beneficial minerals too; it's not automatically the healthiest outcome.
✕
Skipping microbiological testing
A good TDS reading says nothing about bacterial contamination, which needs separate testing.

QUESTIONS & ANSWERS

Frequently Asked Questions

Find answers to common queries about our platform, onboarding process, payment systems, and delivery operations.

Still have questions?

Can't find the answer you're looking for? Reach out to our customer support team for instant help.

Get in Touch

Every 3-6 months for regular households, or sooner if you notice a change in taste, smell, or your purifier's performance.

Ideal RO output typically falls between 50-150 ppm for drinking water — very low readings (under 20 ppm) may mean over-purification, and readings above 150 ppm may mean your membrane needs attention.

A basic TDS meter can give you a quick reading, but it won't catch bacterial contamination, heavy metals, or membrane issues a professional test identifies — useful for quick checks between professional tests, not a replacement for them.

Yes, for suppliers seeking certification, RO water testing results feed directly into your CERT badge status.

Basic home-visit testing covers TDS, pH, hardness, and alkalinity. Bacterial and microbiological testing requires lab processing and is included in the detailed testing option.

Basic parameters (TDS, pH, hardness) are shared immediately during a home visit. Lab-based results, including microbiological and heavy metal testing, typically take a few days — your booking confirmation will show the expected turnaround.

Your report will flag which parameter is out of range and explain likely causes — a failing membrane, an overdue filter change, or a change in source water. You can then book a purifier service or replacement through Volimy Shop.

Ready to test your RO system?

Book a home visit or lab test through Volimy AQUA LAB and get a clear, verified picture of your water quality.

Book RO Water Testing